|
Trim resistors, resistor loops, attenuators, capacitors, thermistors
Trim amplifiers for a DB gain
Trim resistors for a change in state of transistors
Trim voltage with a constant current
Trim surface mount chips on pc boards or flex strips
Capabilities:
Single circuit size as large as 3"x3"
Step and repeat arrays as large as 5"x7"
Measurement accuracy of 5% below 10 ohms, 1% between 10 and 50 ohms, 0.5% between 50 and 10,000 ohms, 1% between 10,000 and 75,000 ohms, 5% above 75,000 ohms.
Kerfs as wide as 0.003" and as narrow as 0.0005"
On-line equipment that can generate most functions and measure frequency, voltage, current and capacitance during trimming
Laser cut features as small as 100 micro inches
Laser positioning accuracy as fine as ± 100 microinches
Cut placement capability of ± 7 micro inches
Plunge, "L", venire , opposing "L"s, serpentine, scrub, "J" and "U" cuts
Advanced Trimming Techniques
Laser Pattern Generation
Thick Film Trimming Capabilities
Thin Film Trimming Capabilities
Standard Trim Cuts
Resistor Reject Marking
Power Resistors
|
